This a drop-in replacement part for the K1 extruder cover. It's compatible with all versions of the extruder (V1, V2, V3).
I have made this cover because I wanted to be able to upgrade the extruder V1 and V2 with the most interesting feature that comes with the V3, the pneumatic PTFE tube connector.
I also added versions with the stock PTFE tube connector of the V1, V2 for those who just want to replace the cover without the need of extra hardware.
Material : ASA/ABS
First layer height : 0.2
Layer height : 0.15
Wall count : 4
Top/bottom layer : 5
Infill : 30%
No support
1x ECAS04 PTFE tube pneumatic fitting connector. Aliexpress
Troubleshooting layer separation.
If layers separates anyway after heating the hole. Check the layer adhesion of your 3D printed part with a destructive test. If the layers are separating too easily that means you have apply too much cooling during the print and or the chamber was not hot enough. Try to adjust your print settings accordingly and try again 💪
Change Log
5 January 2024
Added step files
14 November 2023
Added versions with the stock V1-V2 bowden connector.
12 November 2023
First release + no pattern version added
❤ Enjoy this model? Your support means the world to me! If you love what I do, remember to like and rate the model. You can also follow me to get the latest updates.
If you wish to further help me to fuel future projects, consider buying me a coffee, I'm literally running on those! Every cup counts and is immensely valued. ☕ Cheers!