Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
Filaments Used:
PETG Overture black Transmission Distance: 0.3
PETG overture red Transmission Distance: 2.5
PETG overture orange Transmission Distance: 4
PETG Overture White Transmission Distance: 4.8
Swap Instructions:
Start with black
At layer #7 (0.64mm) swap to red
At layer #8 (0.72mm) swap to orange
At layer #9 (0.8mm) swap to White for the rest.