This cover makes it possible to place the Tukkari case very close to a wall and still be able to use the ventilation.

The cover is designed for the use of an inside mounted fan. The profile of the air deflector as well as the spacers is optimized according to aerodynamic principles.
The height of the cover is chosen so that the free area between the spacers is almost equal in totals to the cross-sectional area of the air outlet on the TLX housing.

Printing

For a step-free print image, a thin layer height should be selected. I would recommend 0.15 mm.

Assembly

4 pieces of M4 * 30 countersunk screws are required to screw on the cover. The original Tukkari faceplate should be mounted between the cover and the enclosure.

Credentials

I was inspired by Colin's idea of his Tukkari TLX Exhaust fan Modification.

More Tukkari Mods

See also my blog article on modifications for the Tukkari enclosure.

• Tukkari Mods on 100prznt.de