Another “Art Deco” Hueforge , now it's one for the Marvel Fans → The Hulk !

The dimensions are 180x180 mm so it fits nicely in a square frame (as seen on the second picture). 

I also made a frame you can print to use for this and my other Hueforge models :

https://makerworld.com/en/models/194571

The colours I used Black (Elegoo)→ Blue (Elegoo)→ Green (Elegoo)→ White (Elegoo)

The plate is now 180x180 but you could resize to bigger or smaller, just make sure you do not change the height (Z) so uncheck “uniform scale” when resizing.

If you want to slice the file manually for use without AMS or other printer please use these settings :

Print at 100% infill with a layer height of 0.04mm with a base layer of 0.2mm

Swap Instructions:
Start with Elegoo Black
At layer #10 (0.56mm) swap to Elegoo Blue
At layer #16 (0.8mm) swap to Elegoo Green
At layer #28 (1.28mm) swap to Elegoo White for the rest.
 

Be sure to check out my other models and/or give me a follow :)

If you like the print would you please be so kind to give it a rating ? Thanks!

Reminder : I share these works for free for hobbyists, you can even print them as gifts for friend and family.

If you like my work: a Boost on Makerworld is always appreciated!

Or if you want you could give me a tip or "buy me a coffee" on :  https://ko-fi.com/3deekes

If you are interested in selling any of my current and future releases send me a message to info@3deekes.be