Dimensions (LxWxH)

132 x 150 x 32mm (100% scale)

Basic information

The design was inspired by the Green Sea Turtle, which is undoubtedly one of the most iconic sea animals. 

The model is is split into 6 movable parts: a shell, which serves as a centerpiece, a head, and 4 fins. It prints in place, and no additional assembly is required. 

The base model is slightly oversized, so that all the fine details come out nicely, namely if you're printing in multicolor. If you're printing it in a single color only, and aren't bothered with loss of definition too much, feel free to downscale it to your liking. The model has been thoroughly tested, and should print fine up to 60% of the original size in single color, if you have a well calibrated, and reasonably accurate setup.

Included files

I have included 5 files: All of them are in the .stl format, and sorted into 2 folders. The folders are labeled Single color and Multicolor, the single color folder contains 1 file, which is a plain, 1 piece version of the model, intended for single color printing. The Multicolor folder contains 3 files for multicolor printing, each file is named after the color, which was used on the example model in the image gallery. Import them all at once into your slicer as one file with multiple parts, and it should automatically align the parts, and assign an individual color to each of them.

Material

PLA

Layer height

0,2 mm

Infill

>15%

Support

None. The model doesn't require any support material.

Scaling

The model should come out perfectly functional even at lower scales. Tested up to 60% of the original scale. Results may vary depending on the accuracy of your setup and quality of the materials used.

Orientation

Default, laid flat on the belly

Adhesion aid

Not necessary, the contact area with the buildplate should be sufficient. However if your print surface suffers from poor adhesion, consider using an adhesive spray, or some other kind of adhesion booster. Using a brim is possible, but not recommended, as it would be too difficult, and inconvenient to remove afterwards.

All resolved past issues with the model files and detailed information about their fixes will be listed in this section. If you're having any problems which aren't on this list, please visit the Known issues section below. If you don't see your problem mentioned there as well, please leave us a message with more details, so that we're able to address it as soon as possible.

12/22/2024 

• Updated the image gallery
• Added new official .3mf project files compatible with Bambu Studio
• Minor changes to the model description

There currently aren't any known issues/work in progress. If you run into any, please contact me via dm.

My work is free for personal, non commercial use. If you want to sell, or monetize my models in any other way, please visit my Patreon for more licensing options.