打印参数：建议使用PETG
0.16和0.2层高都可以，除了外壳以外，其他零件建议降速打印。

手动换色装置，A1打印机建议配合耗材支架使用，可点击头像主页找到耗材支架链接

The following is Microsoft Translator, international friendship understanding:
Printing parameters: PETG is recommended
Both 0.16 and 0.2 layer heights are acceptable, except for the shell, other parts are recommended to be printed at reduced speed.

Manual color change device, A1 printer is recommended to be used with the consumables holder, you can click on the avatar homepage to find the consumables holder link

耗材支架（Consumables Holder）：A1 Consumables Holder 来自 mbus2008 - MakerWorld

演示视频（Demo video）：手动换料装置实操演示，就叫MMS吧！_哔哩哔哩_bilibili

组装视频（Assembly video）：mms手动送料装置组装教程_哔哩哔哩_bilibili

Hardware can be purchased directly from the hardware bag, or according to the list below. link

五金可直接购买五金包，或者按照下面清单进行购买。链接：哔哩哔哩工房 (bilibili.com)