3D model of a Paludarium that is approx 60x30x30. I will provide you with the exact glass panel measurements (So that you will just walk into your local glass shop and order the pieces at the exact size and then just silicone them together). And 3D-printed parts that hold the sliding glass panels to close/open paludarium.

Currently, it's necessary to have at least +300mm in length in some axis that you can print the parts as they're otherwise you will have to cut them to fit your print area.

There are no recommended print settings the lower layer you choose the prettier the printed part will be.

I used like 0,32 layer height + 10% infill.
Can be printed out of the PLA.

Assembly manual + list of the glass parts with measures is attached the units are in metrical units (mm).