Moveable Minecraft Axolotl.  
Most parts print in place, excluding 3 fins.

Parts list:

• Body and tail: minecraft_axolotol.stl, print in place
•  Side fins: minecraft_axolotol-Fin1.stl *2
• Top fin: minecraft_axolotol-Fin2.stl  

The model is parametric. If you ran into tolerance problems you can edit "Tolerance" value in the spreadsheet in the FreeCAD model file and re-export. Make sure to select all parts excluding fins before exporting.

Print Settings:

• 0.1mm layer height
• No supports

Fins should be printed horizontally. After printing, bend the fins to insert them into the 3 slots on head.