暴力风扇18650-2s外壳采用直滑电位器更好调节一体打印

Copyright Claim

暴力风扇18650-2s外壳采用直滑电位器更好调节一体打印

Boost
159
309
34

Print Profile(2)

All
P1S
P1P
X1
X1 Carbon
X1E
A1
A1 mini

0.12mm layer, 2 walls, 15% infill
0.12mm layer, 2 walls, 15% infill
5.4 h
1 plate
1.0(1)

0.2mm layer, 2 walls, 15% infill
0.2mm layer, 2 walls, 15% infill
2.6 h
1 plate

Boost
159
309
34
1
572
40
Released

Description

模型优化后的地方:

1.电调固定位置加宽,方便安装和排线,原位置左边太小容易掉出来;

2.电池上下两端排线位置加大,更易安装,电池需要焊接,上一版本太小容易导致焊接后不易安装;

3.优化了外壳花纹;

制作教程:无刷暴力风扇升级款,详细DIY教程,模型文件全部开源_哔哩哔哩_bilibili

 

 

物料bom表,希望大家都可以低成本做自己的暴力风扇

电机   直径29mm无刷电机

电池   2*18650

磁铁    圆形 4*3

开关    贴片自锁   KAN-10A    

螺丝    m2*6 (推荐m1.8*6)

直滑电位器   10K(B103)  

大电流mos 电子开关 

2-3S锂电池充电模块  

电调  2-3S 30A电调 

元器件不知道买怎么样的按照下面的接线图来对比下

模型修改来自B站能拆爱玩,我分享本意是让大家都自己做一个,并无任何获利,感谢大家理解

接线图和教程如图:

Comment & Rating (34)

Please fill in your opinion
(0/5000)

上传者不是原作者。原作者甚至都不知道的作品被别人占用了,劳动成果被抢了,寒心。 The uploader is not the original author. Original author did not even know this, uploader got all the juice, it's too cheep and low. here is assembly guidance:Original author‘s video link,https://www.bilibili.com/video/BV1CH4y1a77W/?spm_id_from=333.337.search-card.all.click
The designer has replied
4
Reply
再认真看看是否一样
1
Reply
Replying to @Ari889 :
对的,有所改动,这场官司还是你赢了。只要不相同,那就是你获胜!
0
Reply
Hello. Do you have a link to the tutorial in Chinese? the other or may be the original one. I see an image but don't really understand how to do it or how it work. and I don't know Chinese so I can not search for it and this post is probably the only one I can find
0
Reply
Hi. I think 90% of the People here can't read this. I would recommend posting the whole thing here in English.
3
Reply
Google translate. Come on man. You got all this tech at your finger tips. BOM list, I hope everyone can make their own violent fan at low cost Motor: 29mm diameter brushless motor Battery 2*18650 Magnet round 4*3 Switch patch self-locking KAN-10A Screw m2*6 (recommended m1.8*6) Straight slide potentiometer 10K(B103) High current mos electronic switch 2-3S lithium battery charging module ESC 2-3S 30A ESC I don’t know how to buy components, so I can compare them according to the wiring diagram below. The wiring diagram and tutorial are shown below:
7
Reply
Hi, I don't think 90% of the people here speak English, don't forget bamboo come from china, when we were searching models in English, why don't we ask for chinese documents? don't be too mean for that, if chinese can use translater or learn English, u can do that too
6
Reply
Replying to @pingliuyuyang :
I am perfectly capable of using a translator. Why did I write the whole thing because you can't translate a picture, or can you already? So please don't make any clever comments like that you should use a translator, but please translate the highlighted Chinese characters in the picture. Thanks.
2
Reply
尊重一下原作者!开源不容易! 转载好歹也要经过允许,最次也要说一下来源和原作者名字!!!
The designer has replied
3
Reply
好的,我已修改
(Edited)
0
Reply
老哥请问下 b站视频里的吹嘴有一个可以磁吸的结构,但是打印模型里面似乎没有
The designer has replied
0
Reply
我这个版本改进了,那个是中间磁吸容易掉,这个是边缘磁吸,吸在每一个螺丝上 你看我的实物图
0
Reply
Replying to @Ari889 :
请问边缘磁吸, 看图片好像上下尺寸不太一样(磁铁与螺丝), 档案里的是一样大, 这部分有更新图档吗? 谢谢分享.
0
Reply
请问一下,这个2s充电模块会不会容易烧?
The designer has replied
0
Reply
不会的
0
Reply
可以修改旋钮电位器吗?
The designer has replied
0
Reply
可以啊
0
Reply
内部电机好电路等配件哪里有?
The designer has replied
0
Reply
国内某宝都有的
0
Reply
能不能发一下购买链接啊
0
Reply
网上很容易找到,发链接恐怕不被允许。
0
Reply
桨叶用里呀
0
Reply
请问下之前那个旋钮调速的版本外壳有吗? 不太喜欢这种直滑位调速的。作者你好。
0
Reply