Space-saving hangers.

The published models save from 2 cm to 18 cm over a normal sling bar of 200 mm length (also published).

And look the commemt below stl

The total length of the hanger is given by the diagonal of the bed of 300x300, obtaining a hanger of 402 mm long, similar to the original hangers.
The model has a structure of 7.5 mm x 7.5 mm with chamfers of 2mm, it is recommended to make at least 3 contours and a filling of 30-40% (tested in pla with a heavy leather jacket without problems, although there are also some models reinforced to prevent bending (in these models it is not possible to put pants in the flat area).

Only 40 grs and 1.5 hrs time .

I can change the perfil if you need.

2023/27/07 – add f3d original fusion360 for changes

Thanks