Longhorns Lightbox by Geek Genius Collective

Geek Genius Collective

Art>Signs & Logos

Print Profile(3)

All

P1S

P1P

X1 Carbon

X1E

0.2mm layer, 3 walls, 15% infill

Designer

1.5 h

1 plate

5.0(6)

0.2mm layer, 2 walls, 15% infill

Designer

2.4 h

1 plate

5.0(3)

0.2mm layer, 2 walls, 15% infill

Designer

2.1 h

1 plate

Open in Bambu Studio

Boost

Released

Description

Longhorns Lightbox

Original example printed with Bambu basic PLA black, white and orange.

As always be sure to heat up your hotend to clean any old filament that is stuck to the nozzle before sending the print. This will help keep color wisps to a minimum.

The back has a negative cube included in the objects that you can move and scale as you need for your LED installation.

Enjoy and Happy Printing!

Comment & Rating (17)

@h1ckman

Print Profile

0.2mm layer, 2 walls, 15% infill

very nice base. i would make the whole on the back a bit larger. hard to get the led's thru but that depends on the kind you are using. thanks for making.

The designer has replied

@GeekGeniusColle

Thank you for the review. If you ever make another, you can click on the negative cube to move or scale it to help with your LED install. All of our light boxes you can adjust the negative part on the back if you need or delete it if not needed.

@h1ckman

Print Profile

0.2mm layer, 3 walls, 15% infill

very nice. i made at 115%. smaller than expected because of the "long" horns. :-) thanks for making.

@askor

can you make one without the stand?

The designer has replied

@GeekGeniusColle

Added a back profile without the stand and a wall hanging provision you could remove if you wanted.

@TabathaL12

hi! where is the file for the back and the stand?

The designer has replied

@GeekGeniusColle

the front of the box and the back are two separate files due to the print settings being different for them. If you are using the app, select prepare to print and you’ll see the back as one of the profiles to choose.