New Smooth AMS Gen2 for Hydra Mod.

Thanks to @firemanjc, we developed the Hydra version of my Gen2 Smooth AMS. He did an outstanding job providing the information I needed to design it properly. Hydra mod is an extreme design with an undesirable, steep feeding angle.

Here is my solution. A variation of my popular Smooth AMS Gen2.

This is designed For the Hydra Mod. But it would work fine in an unmodified AMS.

📢 Issue Addressed:

1. Smooth the jumping of the near-empty spool.
2. Reduce the AMS forces required to feed the filaments.
3. The PTFE tube acts like a fishing line to keep a smooth and even feeding.
4. Reduces friction.
5. Prevent the filament from eating the AMS feeding funnel or anything.

Yep, it's not the only one out there.

📢 What is distinctive about it;

• NO ROOM IS TAKING FROM THE SPOOL.
• More compact but still as strung. (4.25g per unit and print 50% faster).
• It can be printed in PLA, but I strongly recommend using minimum ABS, PETg, or better.
• Yes, you can use any monster desiccant box.

I highly recommend my Slim Desiccant box. You don't need to remove the spool when refreshing it.

https://makerworld.com/en/models/69484#profileId-73827

You can find my Smooth AMS Gen2 for the X1 / P1 series.

https://makerworld.com/en/models/128483#profileId-139112

Have fun in the MOD adventure.