Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
Filaments Used:
PETG JAYO Black Transmission Distance: 0.3
PLA+ Sunlu Red Transmission Distance: 3.6
PLA BambuLab Tough Gray Transmission Distance: 1.7
PLA+ Sunlu White Transmission Distance: 0.7
!!!! It appears you have mixed filament types. Be certain this is what you want. !!!!!
Swap Instructions:
Start with Black
At layer #14 (1.2mm) swap to Red
At layer #15 (1.28mm) swap to Gray
At layer #21 (1.76mm) swap to White for the rest.