Japanese Lantern Remixed by JS Printing

Remixed by

JS Printing

Household>Decor

Print Profile(2)

All

P1P

P1S

X1 Carbon

X1E

0.16mm layer, 3 walls, 15% infill

Designer

6.9 h

1 plate

5.0(29)

0.16mm layer, 3 walls, 15% infill

7.5 h

1 plate

Boost

138

165

226

Released

Description

I found this Japanese Lantern model on Printables: https://www.printables.com/model/318894-japanese-garden-lantern-lamp

I immediately fell in love with it. This upload includes the settings tweaks I've used to ensure a high quality print. The lantern is scaled down to fit on to a single plate but it can easily be scaled up to larger sizes. Details like the lattice structure on the middle section and the tiling on the top section are particularly hard to print in high quality. Hopefully these print settings help.

Of special note, make sure the PLA used for this print is bone dry. Any humidity the filament has absorbed will cause the top section to string like crazy as the small motions along the outside perimeter of the top section involve a ton of rapid, small movements back and forth.

Put a small tealight LED candle in it and enjoy the ambiance!

lantern

japanese

asian

Comment & Rating (33)

@sctraptor

Print Profile

0.16mm layer, 3 walls, 15% infill

👌👌👌

The designer has replied

@JSPrinting

Look how good that came out!

@Bretthtml

Print Profile

0.16mm layer, 3 walls, 15% infill

fun print came out nice. thanks for the model share and profile.

The designer has replied

@JSPrinting

That looks great!

@annomail

Print Profile

0.16mm layer, 3 walls, 15% infill

2nd in Marble 1st in White. My wife love them. Usb lights inside.

The designer has replied

@JSPrinting

They look wonderful!

(Edited)

@Brandonh527

Print Profile

0.16mm layer, 3 walls, 15% infill

This printed really nice and snapped together easily!

(Edited)

@PaulBPunkt

Print Profile

0.16mm layer, 3 walls, 15% infill

very nice!

@soerenk

Print Profile

0.16mm layer, 3 walls, 15% infill

easy to Print and Looks gorgeus

@chefalexander73

Print Profile

0.16mm layer, 3 walls, 15% infill

Printed flawlessly. Printed in Marble with a red sparkle roof

@user_135681931

Print Profile

0.16mm layer, 3 walls, 15% infill

printed and fit great. Thanks!

@Cosi87

Print Profile

0.16mm layer, 3 walls, 15% infill

Some Strining Problems with PETG. But i think its Not a Profile Issue

The designer has replied

@JSPrinting

Dry your PETG filament out before using it to help with stringing. Other tweaks like retraction and nozzle temp can help if you're still having issues.

@thomas76.mayer

Print Profile

0.16mm layer, 3 walls, 15% infill

Perfekt print!!