Hulk #2

Print at 100% infill with a layer height of 0.04mm with a base layer of 0.16mm

The Model is 200x200mm in size
You may print at higher layer heights below the Base Thickness of 0.48mm
The Max allowed Thickness is 2.24mm and the Actual Thickness is 1.96mm

Filaments Used:
    #0e0e10 PLA+ Numakers Pitch Black  Transmission Distance: 0.1
    #008351 PLA+ Numakers Forest Green  Transmission Distance: 2
    #61993b PLA+ Numakers Grass Green  Transmission Distance: 4
    #ffffff PLA+ Numakers Cool White  Transmission Distance: 1.8
    #dcff70 PLA+ Numakers Ryobix Green  Transmission Distance: 3.9
This print uses 5 unique filaments

Swap Instructions:
    Start with Pitch Black
    At layer #18 (0.84mm) swap to Forest Green
    At layer #21 (0.96mm) swap to Pitch Black
    At layer #28 (1.24mm) swap to Grass Green
    At layer #30 (1.32mm) swap to Cool White
    At layer #31 (1.36mm) swap to Pitch Black
    At layer #34 (1.48mm) swap to Ryobix Green
    At layer #43 (1.84mm) swap to Cool White for the rest.