Boy Kisser Badge [Multicolor] by zmiennys

zmiennys

Art>Coin & Badges

Print Profile(3)

All

X1 Carbon

P1S

P1P

X1E

A1 mini

6 boykissers batch 0.08mm layer, 2 walls, 100% infill

Designer

2.1 h

1 plate

5.0(7)

0.08mm layer, 2 walls, 100% infill

33 min

1 plate

4.7(7)

0.16mm layer, single colour, smoothed ironed surface

19 min

1 plate

Boost

137

113

Released

Description

Description:

This is a Boy Kisser Badge created using HueForge and desingie Boy Kisser known from memes. Unfortunately I don't know who is the author of this particular image (if you know let me know) but the author of the character is @Mauzymice.

How to print:

To print this model you need 3 colors: white, red and black - possibly variations of them. The model can be printed on an ordinary printer - you don't need AMS or anything like that.

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm.
In your slicer you need to set color changes in the following places:

Start with Black
At layer #5 (0.48mm) swap to Red
At layer #12 (1.04mm) swap to White

Remember that different brands of filaments differ and the color may behave differently - so if, for example, the model is too red adjust the place where you change the filament.
Also pay attention to the type of filament! E.g. PETG and PLA will not blend together.

Happy Printing!

Comment & Rating (19)

@WiseWolf

Boosted

You like keychains, don't you :)

@Konqi2231cz

I put the big one over the board at school

The designer has replied

@zmiennys

Big boy :o

@mannymccanny12

the creator is mauzy (idrk who that is) but she doesn’t want it to be the boy kisser meme she was just posting artwork 👍

@mannymccanny12

also I’m definitely printing

@JohnDangle

Print Profile

6 boykissers batch 0.08mm layer, 2 walls, 100% infill

Neat little print, forgot to take a pic before I made it into a pin and gave it away LOL. Tried painting the cheeks for use with an AMS to eliminate the red brim, but due to the models geometry it wasn't working out so well. If you see the big black square of thin model mesh around the print, don't worry, it doesn't get sliced or printed. Profile works great but I'd love to see another swing at the model using SVG or something for really clean lines. But hey, not like I would know how! Thanks!