Just a Stackable Box (Vase Mode) - Long Version Remixed by finniminni

Remixed by

finniminni

Tools>Organizers

Print Profile(3)

All

P1S

P1P

X1 Carbon

X1E

0.4mm nozzle

Designer

1.4 h

1 plate

4.7(17)

0.6mm nozzle

Designer

1.5 h

1 plate

4.8(5)

0.6mm nozzle, 0.18mm layer, 1 walls, 0% infill

1.6 h

1 plate

Boost

121

191

272

Released

Description

Looking for a shorter box? The square version of this design can be found here.

This box is designed to be printed in vase mode. It ist 125mm x 250mm wide and 70mm tall. I used my Bambu Lab P1S with a 0.6mm nozzle. The grooves of the box add stability and below the handle you have a flat spot for putting on labels.

Comment & Rating (29)

@h1ckman

i have tried 4 with different flow rates, speed and detail settings. all of them have cracking and separation on the corners above the place for the label. can you make one without the label space? Seems like only on the right side above the label on both sides.

(Edited)

@user_2303956523

Print Profile

0.4mm nozzle

Translucent PETG.

@rudyn91

Print Profile

0.6mm nozzle

perfect

@siros.work

I'm interested in making a taller version of your box. Do you have a 3mf or step file by chance i could tinker with? I don't want to just scale on Z as it'll spread out the ribbing and weaken the box.

The designer has replied

@finniminni

I designed it using Onshape, here is the link: https://cad.onshape.com/documents/9a4c22cc3044e5c14ae98fae/w/80770f003cfabcbc5a618263/e/bce0b083ca98eb0b530bc519

@siros.work

that's great! thanks

@g8v5pzgycj

with a .4 nozzle it’s remarkably flimsy. it stacks with the smaller size boxes well until you put literally anything in them.

The designer has replied

@finniminni

You could either try increasing the wall thickness or give the second version a try: https://makerworld.com/en/models/237672 It does a way better job in stacking with the smaller boxes.