P1S P1P Blink Mini Camera Adapter Faceplate Remixed by Ryan

Remixed by

Ryan

3D Printer>3D Printer Accessories

Print Profile(2)

All

P1S

P1P

X1 Carbon

X1E

A1 mini

0.2mm layer, 2 walls, 15% infill

Designer

28 min

1 plate

4.0(6)

Bigger Blink Camera Mount for newer cameras

Designer

30 min

1 plate

1.0(1)

Open in Bambu Studio

Boost

Released

Description

It was requested that I upload a remix of the original that did not have the top screw mounts for the screen upgrade, so here it is :)

There is a second print profile with a larger ball socket for newer Blink Cameras. Please measure yours before selecting which profile to use.

Remixes and suggestions always welcome and appreciated!

Comment & Rating (13)

@Caleb.sanz

Print Profile

0.2mm layer, 2 walls, 15% infill

build quality and design were good EXCEPT the blink camera “ball” that fits into the modem is too big and cracked the piece rendering it useless.

The designer has replied

@rtownsend9286

thank you for the feedback, it seems Blink changed the ball size and my older camera has a smaller one. I uploaded a print profile with a larger opening, please let me know if you get a chance to try it out!

@justineby86

The ball slot is to small, was unable to mount the camera.

The designer has replied

@rtownsend9286

Mine was pretty tight too and I really had to force it in, however, this allows it to stay in place while rotated. I had a slightly bigger design but the camera would fall down when rotated up, so I made it pretty tight. Maybe try again and hopefully it will pop into place. I'm sorry it didn't work for you, I printed with Bambu PLA on the P1S.

@Jtlrwells

Replying to @rtownsend9286 :

I just printed it today and my Blink Camera ball is also 15mm. My camera was purchased within the last week or so. would you be able to post a remix with the larger dimensions?

@rtownsend9286

Replying to @Jtlrwells :

hi, thank you for the info, I made a new print profile with a larger ball size, please let me know if this works for you!

@dargoh30

Print Profile

0.2mm layer, 2 walls, 15% infill

First one broke because the hole was too small. After a modified the hole to the right size it printed perfect.

@user_2736096827

Print Profile

Bigger Blink Camera Mount for newer cameras

👎

@brigante88

Print Profile

0.2mm layer, 2 walls, 15% infill

Other Issues:not suitable for the articulated sphere of the Blink Mini, when you try to insert it the printed support breaks

The designer has replied

@rtownsend9286

thank you for the feedback, it looks like Blink changed the size on their cameras at some point and I have an older one. I uploaded a new print profile with a larger size hole, I hope this works for you!

@seanbulloch

Print Profile

0.2mm layer, 2 walls, 15% infill