TS.Makers

cover

flabe_b818ce2c-906b-45a2-a125-90444c8828b3.jpg

flabe_b818ce2c-906b-45a2-a125-90444c8828b3.webp

plate_1.webp

plate_2.webp

plate_3.webp

plate_4.webp

plate_5.webp

plate_6.webp

plate_1.png

plate_2.png

plate_3.png

plate_4.png

plate_5.png

plate_6.png

Very straight forward print. Glue is needed for the arms every other component is pressure fit but glue can be used for better sturdiness. Consider a smaller layer height/nozzle for better details.

0.2mm layer, 2 walls, 7% infill

Flambelle from Palworld. Multicolour print doable with a single AMS does require 6 colours though.&nbsp;Glue is needed for the arms. Supports must be used on all components. Check your settings if you are not using an X1C. &nbsp;Consider printing at .08mm or with a .2 nozzle for better details.

Flambelle from Palworld Miniature. 

in3ddesigns

Palworld - Flambelle

Global

Print Profile(1)

Description

Comment & Rating (0)

License

Remixes (1)

Palworld - Flambelle

Related Models

Link Hueforge

Miniature Construction Cone

Bluey and Bingo Dollhouse Beds (Miniature/Model)

Hedwig Snowy Owl