AshHueForge

Print with 100% infill with a layer height of 0.08 mm and a 0.16 mm base layer.

The model measures 115 x 142.94 mm.

You can print with higher layer heights, below the 0.48 mm base thickness.

The maximum allowed thickness is 2.24 mm and the actual thickness is 2.24 mm.

Filaments used:

#080a0d PLA PolyLite Black. Transmission Distance: 0.3

#0056b8 PLA BambuLab Basic Cobalt Blue. Transmission Distance: 1.2

#ff9016 PLA BambuLab Basic Pumpkin Orange. Transmission Distance: 5.5

#e2dedb PLA PolyLite White. Transmission Distance: 5

Change Instructions:

Start with black.

At layer 10 (0.88 mm), change to cobalt blue.

At layer 13 (1.12 mm), change to Pumpkin Orange

At layer no. 20 (1.68 mm), change to white for the rest.