**NEW MULTI PART PROFILE ADDED**

This profile is for Non-AMS printing

Multi parts split onto 4 build plates for ease of single color printers.

This model allows you to thread the lights in a loop through both tubes continuously. (Needing only 1 meter length strip light)

🧬☣️T-VIRUS☣️🧬

My Daughter is obsessed with Zombie Films and Games, so I thought why not make her very own T-Virus Light from her all time favorite film, Resident Evil.

To add lights you'll Need 1.6m LED Strip Lights.

If you want to see how i designed this with an iPad here's a video.

For mine, I used 24v COB LED's but they do get quite hot, so just for safety reasons I wouldn't advise using them for an extended period of time as the filament could ‘possibly’ melt and we don't want that!

Once you have the lights in place, you can then take the top piece and place it on the tubes, simply go ahead and secure it with a little bit of hot glue using a glue gun.

For the Filament, I used Bambu Lab PLA Matte, but to get the best Glow I do recommend using Bambu Lab PETG Translucent for the Tube sections. https://uk.store.bambulab.com/products/petg-translucent?variant=40926167892028

Sell my prints commercially by joining my Patreon

Want to say ‘Thank You’  Buy me a coffee