Waves bookmark
Print Profile(2)
Description
To fit on A1 mini without risk, size it about 5mm less from top and bottom ( change only X and Y axis, do not change Z axis)
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
The Model is 50.18x180mm in size
You may print at higher layer heights below the Base Thickness of 0.48mm
The Max allowed Thickness is 2.24mm and the Actual Thickness is 1.35999mm
Filaments Used:
#000000 PLA+ Sunlu Black Transmission Distance: 0.6
#ecffff PLA Kingroon White Transmission Distance: 4.5
This print uses these 2 filaments but feel free to use yours, efect will be similar :)
Swap Instructions:
Start with Black
At layer #10 (0.88mm) swap to White for the rest.
Thank you for trying my model ;)
Find all my bookmarks under this link :
https://makerworld.com/collections/8505404
Boost Me (for free)
if you find my art good enough, consider boosting ;)
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (17)