Mini Desktop Trash Can by RestoreDoctor

RestoreDoctor

Household>Office

Print Profile(2)

All

X1 Carbon

P1S

P1P

X1E

A1 mini

Adaptive layer height, Gyroid, [Tested], 0.16mm layer, 2 walls, 10% infill

4.6 h

1 plate

4.7(39)

0.16mm layer, 2 walls, 10% infill

5.8 h

3 plates

5.0(1)

Boost

213

295

100

765

603

Released

Description

Update 15.10.2023

New Top - less support required

New Lid - bigger hole for the screw and more weight that it closes itself (should be printed with 100% infill) - 2 Versions available one has a recess for an M10 nut with a wrench size of 17mm

Size: diameter 100mm height about 170mm

Orientation of the parts see below!

Settings:

0.20mm Standard
support needed
PLA / PETG
(Drill out the holes in the lid with a 3mm / 3.5mm drill no longer necessary with the new lid)

Hardware:

2x M3 x 16mm

Orientation for assembling

Orientation new Lid with auto tree support

I used a support blocker for the holes

support only necessary under the holes

Comment & Rating (100)

@.s_.

Print Profile

Adaptive layer height, Gyroid, [Tested], 0.16mm layer, 2 walls, 10% infill

the lid could use some better supports i think but these are so cute

The designer has replied

@ValdiLab

Thanks for reviewing, I appreciate the feedback!

@.s_.

carbon fiber polycarbonate so i can chuck it at the wall and it won't break.

@Roberto.suse

Print Profile

Adaptive layer height, Gyroid, [Tested], 0.16mm layer, 2 walls, 10% infill

ottimo

The designer has replied

@ValdiLab

Thanks for reviewing, I appreciate the feedback!

@.s_.

id love to help you make some design changes to make this print and work better... but having the cad files would make that a lot easier. if you're willing to share them? i had a layer shift on the lid so i made a new print profile and resliced it, i will share that later if i get time and remember. awesome model! printing a second one on my 500mm voron at max scale lol. will share those pics in a day or two when it finishes.

@paglini.mike

Nice!

@Jonnycraft

The print profile is no longer public

was good to print but the supports are a little bit difficult to remove without any pliers.

@Terr0r_Arie

Print Profile

Adaptive layer height, Gyroid, [Tested], 0.16mm layer, 2 walls, 10% infill

The designer has replied

@ValdiLab

Thanks for reviewing, I appreciate the feedback!

@will.breneman

Print Profile

Adaptive layer height, Gyroid, [Tested], 0.16mm layer, 2 walls, 10% infill

(Edited)

@creteloc

This turned out absolutely adorable! It fits my desk nicely to catch all of the pla scattered over my desk all the time. I do have one question though. How do you get the screws in? Is there a trick? I have a tiny screw driver but can't get to them inside the lid.

The designer has replied

@RestoreDoctor

Thank you for your review. Hold it in this position and then you can screw it in well. I've now added the picture to the description.

@creteloc

Wow, that was easy. I'm embarassed that I couldn't figure that out. Thank you!

@creteloc

Turned out so cute!

@Ace3DPrints

Print Profile

Adaptive layer height, Gyroid, [Tested], 0.16mm layer, 2 walls, 10% infill

top part not able to print no matter what orientation still fails.

(Edited)

The designer has replied

@ValdiLab

What kind of fails do you have? Adhesion? Bad lines? Seems like you are the first person to complain about it, give us more information!

@Ace3DPrints

Replying to @ValdiLab :

no issue with adhesive the issue is you can see both sides looks bad 3 times I tried to print same issue but the main body printed great, can you show me how you printed and results as I don’t see how this will work thanks