Kid Buu Lightbox ( Dragonball Z )
I've been playing around with filament shading lately and this one turned out great in my opinion. The layer heights for the colors are different so no need to have 3 different pinks or greys just use one color for light, mid, and dark. Make sure you have your light and power in place before pressing it onto the stand as trying to pull it back off after could result in the pin breaking. I also used a 1/8 inch drill bit on the hole in the bottom of the model because there isn't much tolerance on the hole.
Measurements for Usb C Connection is 14mmx6mm
I've added the 3mf of the layer height and setting I use in the raw model files, makerworld will fail in uploading if I try it with my original profile due to the time it takes to slice.
Back plate and stand can be printed with 0.02 layer height to save some time. I would recommend printing the actual image with my 0.08 3mf file.