Car Trash Can by Tridense

Tridense

Hobby & DIY>Vehicles

GIF

Print Profile(4)

All

P1S

P1P

X1 Carbon

X1E

A1 mini

Optimal print settings

Designer

10 h

3 plates

4.7(66)

PETG (CF), All-on-1 Build Plate

10 h

1 plate

4.9(13)

0.2mm layer, 4 walls, 15% infill

10.2 h

3 plates

4.7(3)

0.2mm layer, 4 walls, 15% infill

33.4 h

3 plates

Open in Bambu Studio

Boost

435

879

102

1 k

783

Released

Description

This is a model I've designed myself. As the model is not behind a paywall, support is appreciated!
https://www.buymeacoffee.com/Tridense

Clip it on to your doors sidepocket or onto the pocket on the back of your seat!

Volume of 2 liters (67.5fl.oz.)

Insert a small plastic bag to easily empty the can

Print the flipper lid 100% infill, important for balancing the pivot

All the parts are pre-oriented for printability, I used tree supports on all the parts and kept the treshold angle at 29 degrees.

Changelog:

2023.09.12: Added a little curve on the hook to make it a little bit more secure (Bin v2)

Comment & Rating (102)

@user_432651759

Print Profile

Flipper 2 Colors AMS, colored Text, 0.2mm layer, 3 walls, 15% infill

No quedo bien el bicolor y la calidad de impresion no salio bien

Other Issues

The designer has replied

@Botaz19

looks like bad leveling, make sure your bed is leveled or your prints might fail

@user_432651759

its the first Print of The printer. Has the Bed Leveling activated.

@mrhansen7692

Replying to @user_432651759 :

its a user problem....everything is usually a user problem google and see what you the user can do to make a better print come out dont give two stars for your issues good grief people come on.

@schiko

Print Profile

Optimal print settings

I like it very much although it's bigger than expected. Printed in PETG-CF.

@tooling_lee

Print Profile

PETG (CF), All-on-1 Build Plate

Nice design, to larger for my car.

@user_1729478291

wonder why my support failed at the very end using a fresh spool of PETG-CF.

@psalms118woodcr

Print Profile

Optimal print settings

turned out perfect

@gwenda

Print Profile

Optimal print settings

printed without problems

(Edited)

@user_1729478291

printed in Petg-CF like the remix and my free support failed at the very end. what should I try differently?

@Folder_Fanatic

Print Profile

Optimal print settings

Prints perfectly 😁

@user_3933502035

Print Profile

Optimal print settings

perfect

(Edited)

@erwin_flip1

Print Profile

Optimal print settings

looks nice. no issues.

@Gasguirre

Print Profile

Optimal print settings

I just added small piece of tape to avoid the sliding of the top. but overall fits great. good print. thank you

License

This user content is licensed under a Standard Digital File License.

You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.