Can be scaled as long as you keep Z (height).

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

Filaments Used:

PLA JAYO Black Transmission Distance: 0.3

PLA BambuLab Basic Red Transmission Distance: 5

PLA BambuLab Basic BambuLab Green Transmission Distance: 8

PLA JAYO White Transmission Distance: 6

!!!! It appears you have mixed filament types. Be certain this is what you want. !!!!!

Swap Instructions:

Start with Black

At layer #7 (0.64mm) swap to Red

At layer #11 (0.96mm) swap to BambuLab Green

At layer #15 (1.28mm) swap to White for the rest.