I designed a Mickey Mouse to put on my 3-year-old son Sebastião's cake!

It was based on this online available model: link to the model Thanks for that mate ! msmfnafboi
 

I made significant modifications to it to enable colour printing. It was printed on a Bambulab A1mini and took approximately 25 hours. I printed three Mickeys at once to optimize filament purging for each colour.

The resolution is 0.12, using a basic Bambulab profile with minor adjustments from the standard settings. Five colours are required, but the A1 can only print four at a time. To work around this limitation, I included a pause command to change the yellow to beige, allowing us to print all five colours. In the slicer, you'll need to set beige to print as yellow when sending the file to the printer.

The colours used are black, red, yellow, white, and beige (skin colour).

One more thing I have changed quite a lot is the 3D model, and for that, I don't consider a remix since it was modelled for animation, but I would use a lot more time to do it from the ground up and for that I heartfelt gratitude for creating the model. Thanks msmfnafboi

You can edit the blender file, because the model was rigeed you can change the pose if you want but you have to deal with the slicing alone ! but if you do it post a remix :D

You may want to print this to !