This is my latest HueForge print, a police patrol car responding to a call on a rainy day. I decided to use some vivid colors for this project to put blending to the test. It worked very well considering that this print only uses 4 colors. Let me know how this works out if you decide to print it. Thank you.

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

Filaments Used:

PLA+ Sunlu Black Transmission Distance: 0.6

PLA+ Sunlu Blue Transmission Distance: 4

PLA BambuLab Matte Scarlet Red Transmission Distance: 2

PLA+ Sunlu Pure Yellow Transmission Distance: 5

Swap Instructions:

Start with Black

At layer #6 (0.56mm) swap to Blue

At layer #8 (0.72mm) swap to Scarlet Red

At layer #11 (0.96mm) swap to Pure Yellow for the rest.