Anti-Dust screen for Stepper Motor by 123cut

123cut

3D Printer>3D Printer Parts

GIF

Print Profile(12)

All

X1 Carbon

P1S

P1P

X1E

A1 mini

E __With logo, Two colors

Designer

23 min

1 plate

4.9(249)

A __Without logo, ONE color, 0.2mm

Designer

16 min

1 plate

4.9(283)

C __With logo, Two colors 25% Honeycomb

Designer

24 min

1 plate

4.9(28)

D __With logo, Two colors

Designer

24 min

1 plate

4.9(15)

Click to see more

Open in Bambu Studio

Boost

984

2254

666

3.7 k

2.8 k

Released

Description

Given the fact that I haven't invented anything because I noticed that there are already many similar ones around, I simply created one that suited my needs. I tested this clip for about a month before sharing it here, and it has no issues during printing or calibration. I compared it with some existing models that are equally valid, refining small details.

- The new ultra-thin version has no problems during the printing process.

- The enhanced versions of the clips ensure better grip and increased durability.

Thanks to all your support and suggestions, we have reached the perfect version. Any subsequent changes will be purely aesthetic, and if you'd like, you can also suggest your own design. The most beautiful ones will be featured in the description, and each contributor will be assigned a letter in the print profile.

Comment & Rating (666)

@lbprace

Print Profile

A __Without logo, ONE color, 0.2mm

super

@user_96968298

hey the green clips where can i find them ?

@SPWMed3D

Do you have the upgrades shown in this picture as a collection anywhere?

@Xerses

INSTALLATION OF THESE WILL CAUSE LAYER SHIFT - I have a very similar version of these and although it is an interesting idea, the implementation causes a layer shift whenever there is a filament change. The printer head uses the back left corner as part of its positioning routine so whenever there is a filament change, especially if you use an AMS like me, then the printer recalibrates its head position and shifts things forwards. You can see the results in the images I shared below. The layer shift issue started right after installing the covers, but once I found the issue and removed them, no more layer shift and my prints are perfect again. This is the thread where you can read more about it, with my response at the bottom: https://forum.bambulab.com/t/layer-shifting-after-color-change/3152/51

The designer has replied

@Xerses

Replying to @123cut :

This is your C version, printed this morning, and as you can plainly see in the second image, the printer head collides with the cover because it is very thick. Anything over 1.5mm thick will get hit by the printer head in the rear left corner and cause layer shift when there is a filament change. Your design is nice, but causes issues on P1 printers with AMS, or when filament change occurs in a print. Your above response makes me think you have not tested your part in this scenario. Your covers are nice, but would be great if you would redesign them to have no contact with the printer head.

@123cut

Replying to @Xerses :

The scenario you're showing has been tested on all 5 different printers I have... the printer shouldn't reach that position unless manually brought there... but even if you wanted to bring it, it would hit the bottom part of the motor first.

@diego_cromero

Print Profile

E __With logo, Two colors

nice model

@superintendent

Print Profile

E __With logo, Two colors

great fit.

@Panda279TV

Print Profile

B_Honeycomb Pattern 0.2mm layer, 2 walls, 20% infill

Super geil und funktioniert! - Gedruckt in 0,20 mm Standard, mit 20 % Füllung, 3 Wandlinien und 16 min Druckzeit - Bambu ABS Marineblau (40602) in weniger Speed und ohne Support