Kreo 3D

cover

IMG_3042.JPG

IMG_3043.JPG

plate_1.png

2025-07-31_9ab69930eeeba8.jpg

0.2mm layer, 2 walls, 15% infill

You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.

This user content is licensed under a Standard Digital File License.

Convierte tu panel IKEA SKÅDIS en un mini-taller ordenado: este gancho fino para herramientas está diseñado específicamente para colgar destornilladores, alicates, llaves combinadas y cualquier utensilio con orificio de Ø 4–6 mm. Su brazo estilizado se desliza sin juego por el orificio, mientras la punta curva actúa de tope para evitar que la herramienta se deslice.<h3>Características destacadas</h3><ul><li>Compatibilidad exacta SKÅDIS – las dos pestañas encajan a presión en los orificios de 5 × 5 mm y 12 mm de paso del panel.</li><li>Gancho de perfil delgado (⬇ 5 mm) – cabe en orificios pequeños sin forzar ni dañar el mango de la herramienta.</li><li>Impresión monobloque sin soportes – listo en 25 min con boquilla 0,4 mm y prácticamente sin pos-proceso.</li><li>Aguanta más de 2 kg con PLA (probado con llave inglesa de 210 g repetidamente). Para cargas mayores usa PETG o ABS.</li></ul>

Transform your IKEA SKÅDIS pegboard into a meticulously organized miniature workshop: this sleek tool hook is specifically engineered for suspending screwdrivers, pliers, combination wrenches, and any implement featuring an Ø 4–6 mm aperture. Its slender arm glides effortlessly through the opening without play, while the curved tip functions as a stopper to prevent the tool from slipping.<h3>Key Features</h3><ul><li>Precise SKÅDIS Compatibility – the two tabs snap securely into the 5 × 5 mm holes with 12 mm spacing on the board.</li><li>Slim Profile Hook (⬇ 5 mm) – accommodates small apertures without forcing or damaging the tool handle.</li><li>Monolithic Support-Free Printing – fabricated in 25 minutes with a 0.4 mm nozzle and minimal post-processing.</li><li>Withstands over 2 kg using PLA (repeatedly tested with a 210 g spanner). For heavier loads, employ PETG or ABS.</li></ul>

Print Profile(1)

Description

Key Features

Comment & Rating (5)

License