Mini Deadpool

A mini of Deadpool

Highly detailed mini of Deadpool in a not so dynamic pose, dual-wielding katanas on his back and pistols on his hip. 
 

I spent WAY too much time on features that are not seen at all at this scale, however if you use a resin printer or scale the model up, they will.
 

The katanas can either be stored in the back or in his hands, I came up with the idea after I glued the hands so mine cant hold them, but yours can! (hopefully!!!)


 

You will need 6x2mm magnets for this, if you dont have you will find a link for a pin you can use below (yep, i forgot to add it again)

Instructions:

 

Insert the chest piece into the body, it will be held there by friction. Clip a piece of filament, dip a little glue and insert. Wait for it to dry ( Yeah, i made it too big  x.x)

 

The mask has tiny supports inside, a simple lever action and it will pop out. If it does not, let me know and ill try to figure something else out

Attach the black shoulderpads to the arms. Only one way it can fit and feel right.

Attach to body

Katanas are printed horizantally, i left a yiny piece to coonect them, apply a thin layer of glue and join. I used plastic magic, so take care using superglue… in fact, ive no idea how to do it with super glue :S

Glue the backpack and now you can store those katanas.

Print the belt, and dip it in hot water to soften and get the needed curve. I used plastic magic which chemically melts it to do it and glue it at the same time.

Attach the head and you are done!

Any issues let me know.

Nosk - From Hollow Knight

If you want to support me, you can join my Patreon page to support me and sell physical prints of my models with a clear conscience :D

https://www.patreon.com/c/thelightning3d/membership