GIF
GIF
GIF

Modular Slidey Storage Pod - Wall Mounted For Tools/Parts/Medicine


Print Profile(3)

All Parts, 3 Extra Labelled Doors, 0.2mm layer, 2 walls, 15% infill
All Parts, 3 Extra Labelled Doors, 0.2mm layer, 2 walls, 15% infill
Designer
A1 mini, P1S, P1P, X1, X1 Carbon, X1E, A113.7 h
4.9
Bambu Door, 3 Colour, 0.2mm layer, 2 walls, 15% infill
Bambu Door, 3 Colour, 0.2mm layer, 2 walls, 15% infill
Designer
A1 mini, P1S, P1P, X1, X1 Carbon, X1E, A12.7 h
5.0
Red Cross Door, 0.2mm layer, 2 walls, 15% infill
Red Cross Door, 0.2mm layer, 2 walls, 15% infill
Designer
A1 mini, P1S, P1P, X1, X1 Carbon, X1E, A12.3 h

244
389
34
491
292
Released
Copyright Claim
Model
Comment & Rating
Remixes
Related Models

Description

Modular Slidey Storage Pod

 

 

Features:

  • 3 Shelves For Storage
  • 1 Full Pod Prints In Under 9 Hours
  • Easy Assembly
  • Sliding Door
  • Stylish Design
  • Great For Use As A First Aid/Medicine Cabinet
  • Can Be Colour Coded For Different Purposes
  • Perfect For 3D Printer Parts, Adaptors, Cables, SD Cards, USB Sticks, Scrapers And Anything Else That Will Fit!
  • Easy Removal From The Wall For Simple Loading, Unloading And Organizing
  • Modular System That Can Be Mounted In Horizontal And Vertical Rows (Single And Double Mounts Included)
  • Strong And Reliable Storage Solution
  • Can Be Printed On An A1 Mini
  • 3 Different Labelled Doors Included - ‘Parts’, ‘Tools’, ‘First Aid’

 

Assembly:

  • Glue the ‘Shelves’, ‘Side Left’ and ‘Side Right’ together.
  • You only need to add glue to the very edge of the shelves and then seat them in the slots in each side piece.
  • Once the glue is dry, insert the door through the grooves that are cut in the door channel
  • Ensure the door is in the correct orientation as it slides in from back to front
  • Slide the door all the way round its channel until it meets the stop at the front
  • Insert the 2 small stop pieces to close off the door channel. This is optional as once mounted on the wall, the door handle acts as a stop.

Assembly should take no more than 5 minutes.

 

During assembly you must ensure all edges of the shelves are seated into their corresponding slots. If they are not all the way in then the sliding door will not function correctly.

 

Add some lubricant to the slots that the door slides in, for a smooth motion. I use silicone grease and it works great.

 

Tip: You can make the pod any width you like! - You just need to scale the shelves and the door up or down in Bambu studio.

  • To do this, scale both parts in the X-axis only and ensure the door is always 2.9mm narrower than the shelves.

 

This design is the first version I have made of this concept - If you have any issues or recommendations for edits or additions, please leave a comment or message me! I'm open to constructive feedback to make this as good as it can be :) - It would also be good to add some additional features that users may want to see in the future. I already have some ideas, but would love to hear what you think too!

 

Thanks for looking!

 

Please share your makes with this one! - I had a fun time designing this and am very happy with how it turned out.

 

Also, please rate and review your printing experience :) - It helps my designs get seen by more people :P


License

This work is licensed under a Standard Digital File License.

You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.

Comment & Rating (34)

Please fill in your opinion
0/5000

Print Profile
All Parts, 3 Extra Labelled Doors, 0.2mm layer, 2 walls, 15% infill
Works great! 2nd one is printing now.
(Edited)
The designer has replied
2
Reply
Appreciate the feedback! Thank you for printing :)
(Edited)
1
Reply
What are the two "Generic-Cube" parts for? They show as semi-transparent on the Slides and Stops plate in Bambu Studio
The designer has replied
1
Reply
They are support blockers :) - Just to stop it printing support in the grooves. Thanks.
2
Reply
Good print :) Here video: https://www.youtube.com/shorts/fOz-4YREuzI
The designer has replied
1
Reply
Thanks for printing! :) Looks great!
0
Reply
Print Profile
All Parts, 3 Extra Labelled Doors, 0.2mm layer, 2 walls, 15% infill
I wanted to get it glued and hung/used before leaving my review. it's been a few days now and I really dig it! it works well, looks great. I'll be printing another! Nice design, thanks!
The designer has replied
0
Reply
Looks perfect! Thank you for printing and leaving a review :)
0
Reply
Print Profile
Bambu Door, 3 Colour, 0.2mm layer, 2 walls, 15% infill
A nice shelf to store small printer stuff which is everytime laying around. Perfect print and fit. No problems with the assambly. Shelf and side panels printed in Anthrazit PETG. Door printed in Bambulab PLA.
0
Reply
Print Profile
All Parts, 3 Extra Labelled Doors, 0.2mm layer, 2 walls, 15% infill
Perfekt - mega sauber
0
Reply
Print Profile
All Parts, 3 Extra Labelled Doors, 0.2mm layer, 2 walls, 15% infill
0
Reply
Will a small can of WD40 fit inside this storage pod?
The designer has replied
0
Reply
As long as it's under 45mm diameter and 150mm tall. That's pretty much the largest round object that can fit on 1 shelf. Thanks!
0
Reply
Thank you so much for replying!! I’ll check the model out tomorrow 🤩
0
Reply
Print Profile
All Parts, 3 Extra Labelled Doors, 0.2mm layer, 2 walls, 15% infill
printed easily and fit up well. assembled easily too. slightly smaller than it was in my minds eye but that’s on me having bad skills at visualizing size lol.
The designer has replied
0
Reply
I debated making it bigger but it would have stopped people with an A1 Mini being able to print it. I may do a bigger version for a 256x256 bed at some point, if that's something that you would want? Thanks for printing! :)
(Edited)
1
Reply
Replying to @Zurlingo3D :
Id be interested in a bigger version :D. this is a great design and perfect for what I need. just need a little bigger.
0
Reply
Hi Would you be able to make a door with just a big Red Cross symbol on it for an alternative first aid box? 🙏
The designer has replied
0
Reply
Of course! - Great idea :) Check back in an hour or so and I should have a new profile up then. Thanks for printing!
0
Reply
@Deploy - It's live now! :)
0
Reply

Remixes (0)

There are no remixes yet