Stackable Swatch Tray Box by chippwalters

chippwalters

3D Printer>3D Printer Accessories

Print Profile(1)

All

A1 mini

P1S

P1P

X1 Carbon

X1E

0.2mm layer, 2 walls, 15% infill

Designer

3.5 h

3 plates

4.9(67)

Boost

168

336

473

456

Released

Description

Use my print profile for best results, I cannot guarantee print profiles by others.

I have a lot of different swatches and I like the Bambu Swatch tray for storing them, but I don't like them laying around loose. This box can store the trays and has a snap lid. You can stack these one of top of each other and they will also snap together. There is a nice slot on the side where you can use your finger to lift up the trays.

There are two different lids you can print with. One is a debossed logo and only requires 1 color, and the other has 2 colors which shows off the Bambu logo as well.

Comment & Rating (87)

@guenny86

Print Profile

0.2mm layer, 2 walls, 15% infill

@moica31

where to get the inside parts off the box?

(Edited)

@guenny86

the inside parts are on the original SD card that is by the new printer (A1 mini)

(Edited)

@DrWaffelix

Print Profile

0.2mm layer, 2 walls, 15% infill

Printed it out first time perfectly. Then I realized that the Box is taller on the inside than it needs to be for the Swatches that Bambu sells combined with the 4 Trays. So I made some slight changes to the model by changing the Scale in the Z direction in that way the four Swatch Trays fit perfectly.

The designer has replied

@chippwalters

It is designed larger so that people can add other plates for their own filaments.

@mateoskyline

Print Profile

0.2mm layer, 2 walls, 15% infill

Looks great with a lot of colors inside! :)

@r.bourne45

Printed great. And fits lovely.

@i3Dprint

Print Profile

0.2mm layer, 2 walls, 15% infill

Great little box! Lid fits very snug - if anything a tad too snug, but it will wear down a bit with use. Would have been absolutely perfect if it had a little hinge.