NBA Lithophane Lightbox. I have 2 panels available for this light box. 1 High Definition Lithophane that is 8 Color, 1 CMYK Lithophane that is 4 Color.
This NBA lightbox has the 23-24' years point per game leaders on it, something for every fan of the NBA, Great players deserve to be recognized and celebrated.
Notes:
the brighter the LED lights used the better, on this one I used a double row of 5000K color temperature LED's along the back perimeter and it looks fantastic with the light on, even better in the dark, really pops.
the corners are a little tight on this one, just square out the corners on the frame for the NBA and they will snap in. it's tight but fits nice. Super Glue the provided lip on the Lithophanes and push in place. (test fit first). I used the spray kicker to set it in place.
No need to remove the calibration print lines on this model, these use most of the plate size. You might get some errors that say the print tower is too close, just ignore them, they are close but won't interfere with anything or hit.
This is a 3 part print, Print plate 1 (Box Frame) and Plate 2 (Back Cover) from profile 1, Select the Lithophane you want (Profile 2 is the 8 Color, Profile 3 is the 4 Color Lithophane.
Profile 1: Lightbox Frame and Back Deflector (1 plate each). I suggest using a PEI plate and print face down, No brim is needed, but make sure you have a freshly clean PEI plate. The back has a white reflector build into it. the parts are already oriented properly in the files
Profile 2: High Definition 8 Color Lithophane Front panels. I printed on PEI plate I used the bambu CMYK bundle plus 4 other colors for this print. there is a negative part over the lithophane panel that will trim and leave a lip on the lithophane so it'll fit in the frame properly, it's tight but fits perfectly. just go slow when pushing it in. add a little superglue around the edge on the back from the inside. (See Colors Used Below)
Profile 3: Lower Definition 4 Color Lithophane Front panesl. I printed on PEI plate. there is a negative part over the lithophane panel that will trim and leave a lip on the lithophane so it'll fit in the frame properly, it's tight but fits perfectly. just go slow when pushing it in. add a little superglue around the edge on the back from the inside. (See Colors Used Below)
These are the Colors I used for the High Def 8 colors profile.
Bambu Basic Jade White
Bambu Basic Magenta
Bambu Basic Cyan
Bambu Basic Yellow
Bambu Basic Beige
Bambu Matte Ice Blue
Bambu Matte Sakura Pink
Bambu Basic Black
These are the Colors I used for the Lower Def 4 colors profile.
Bambu Basic Jade White
Bambu Basic Magenta
Bambu Basic Cyan
Bambu Basic Yellow
Comment & Rating (1)