This is the "jewelry tray with hooks" designed by me. You must carefully press the hooks through the holes. These are then stable thanks to the support surfaces.

It is for wall mounting with tape, but you can also drill a hole or add one in the slicer.

Dimensions:

• Length: 120mm
• Width: 60mm
• inner Height: 10mm
• Height of the mounting surface: 18mm

Settings:

• layer height: 0.2mm
• line width: 0.42mm
• wall loops: 2-3
• supports: yes, for both hooks (see pictures)

Note:

As you scale the tray the wall thickness will also change.

Feel free to upload your Makes!