GotDragon

Print with 100% infill using a 0.08 mm layer height and a 0.16 mm base layer.

The model measures 96.22 x 171 mm.

You can print with higher layer heights, below the base thickness of 0.48 mm.

The maximum allowable thickness is 2.24 mm and the actual thickness is 2.24 mm.

Filaments used:

#080a0d PLA PolyLite Black. Transmission distance: 0.3

#c00d1e Bambu Lab PLA Basic Red. Transmission distance: 4

#ff9016 Bambu Lab PLA Basic Pumpkin Orange. Transmission distance: 5.5

#e2dedb PLA PolyLite White. Transmission distance: 5

Swap Instructions:

Begin with black.

At layer 8 (0.72 mm), swap to red.

At layer 12 (1.04 mm), swap to pumpkin orange.

At layer 16 (1.36 mm) swap to white for the remainder.