Another great spiderman hueforge.
Can be scaled as long as you keep Z. Only 3 colors needed (see below). Can be also another grey with pretty similar colors.
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
Filaments Used:
PETG JAYO Black Transmission Distance: 0.3
PETG JAYO Gray Transmission Distance: 2.5
PETG JAYO White Transmission Distance: 6
Swap Instructions:
Start with Black
At layer #6 (0.56mm) swap to Gray
At layer #12 (1.04mm) swap to White for the rest.