Connectable Ring - Free 3D Print Model

Search models, users, collections, and posts

TrocheHole

Fashion>Jewelry

IP Report

Print Profile(2)

All

P1S

P1P

X1 Carbon

X1E

A1 mini

H2D

H2D Pro

H2S

P2S

H2C

X2D

A2L

(Official) [All types on each plate] 0.2mm layer, 3 walls, 15% infill

Designer

1.3 h

4 plates

4.9(17)

Medium tolerance, 0.2mm layer, 6 walls, 25% infill

24 min

1 plate

4.5(6)

Open in Bambu Studio

Boost

113

138

139

Released

Description

A ring to connect your feelings with your loved ones.

Printing Difficulty

4 types of data are available.
──────────
[HARD] ─ CLR 0.20mm. Hard to print, but the end of the ring-line can be held in place.
[MEDIUM] ─ CLR 0.25mm. Between [HARD] and [EASY].
[EASY] ─ CLR 0.30mm. Easy to print, but the end of the ring-line comes off easily.
[SuperEASY] ─ CLR 0.35mm. Please use only if printing with [EASY] is just not going well.
──────────
*CLR: the clearance between the inner and outer rings

How to Use

Open ─
This ring does not open horizontally. To open it, shift the end of the outer ring-line vertically.

Close ─
There are notches on both ends of the ring-line to hold them in place. Therefore, the inner end needs to be fitted first to close the ring. The outer end should be fitted last.