Compact Fitting Socket for Dry Box
Copyright Claim
Compact Fitting Socket for Dry Box
Boost
126
328
25
Print Profile(2)
![(Official) [All types on each plate] 0.16mm layer, 3 walls, 15% infill](https://makerworld.bblmw.com/makerworld/model/UScfce605ba50c6c/design/2023-10-07_e9fefbd1ae9f3.jpg?image_process=resize,w_100/format,webp)
(Official) [All types on each plate] 0.16mm layer, 3 walls, 15% infill
Designer
1.6 h
5 plates
A1 0.2mm layer, 3 walls, 15% infill
1.7 h
5 plates
Boost
126
328
25
0
422
267
Released
Description
Compact sockets for PTFE tube fittings with a filament guide for use in a dry box.
In addition, optional parts (red ones in the picture) can be used to add angles.
Compatible with 3 Types of Fittings
- PC4-01 (1/8)
─ *Similar to M10, but different. The screw diameter is about 9.5 mm. - PC4-M6
- PC4-M10
Bill of Materials
- PTFE Tube Fitting ─ x1
- M3 Hex Nut (or Tap Processing) ─ ×2
- M3 Screw
─ [0° mount] 8mm or more ×2
─ [20° mount] 15mm or more ×2
─ [30° mount] 18mm or more ×2
─ [40° mount] 22mm or more ×2
Comment & Rating (25)
All
Print Profile
(Official) [All types on each plate] 0.16mm layer, 3 walls, 15% infill
These are really nice - 3 small holes in the side of the dry box I am using PC4-M10 fittings Thanks for sharing a great design.
1
Reply
Print Profile
0.2mm layer, 2 walls, 15% infill
perfect!
1
Reply
Print Profile
0.2mm layer, 2 walls, 15% infill
work great, fits them well once tighted
1
Reply
Print Profile
A1 0.2mm layer, 3 walls, 15% infill
The models provided by this profile are nothing short of perfection. The printing quality is superb, with every intricate detail clearly defined.
0
Reply
Print Profile
(Official) [All types on each plate] 0.16mm layer, 3 walls, 15% infill
1
Reply
Print Profile
(Official) [All types on each plate] 0.16mm layer, 3 walls, 15% infill
I had to reduce print height to get good threads. Other than that, this printed well.
1
Reply
Print Profile
(Official) [All types on each plate] 0.16mm layer, 3 walls, 15% infill
Works perfectly. Thanks for share with us
0
Reply
Print Profile
(Official) [All types on each plate] 0.16mm layer, 3 walls, 15% infill
easy to print
0
Reply
Print Profile
(Official) [All types on each plate] 0.16mm layer, 3 walls, 15% infill
tolarences are a bit tight and i broke a few screwing the pipe adabters in but works great
0
Reply
Print Profile
0.2mm layer, 2 walls, 15% infill
Printed perfectly on my X1 Carbon.
0
Reply
License
This work is licensed under a
Creative Commons Attribution-Noncommercial-Share AlikeRelated Models
© 2024 MakerWorld