Ying yangd hueforge
No background!
created with filament painting technique using hueforge software.
Remember if you want to scale, do it only with x and y axis, z must be the same as original.
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
Filaments Used:
PLA BambuLab Matte Charcoal
PLA BambuLab Basic Beige
PLA BambuLab Matte Ivory White
Swap Instructions: if you don't have ams just put pause on specified layers and swap filamen manually
Start with Charcoal
At layer #7 (0.64mm) swap to Beige
At layer #15 (1.28mm) swap to Ivory White for the rest
Run out of beige do had to use Brown prefoamed pla