Another “Art Deco” Hueforge , this one is perfect for a Valentines gift for someone or just for yourself :)

The dimensions are 180x180 mm so it fits nicely in a square frame (as seen on the pictures)

The Main print profile is the 0.4 layer height variant, it takes longer to print but has more detail.

The 0.8 layer height prints faster but is a little reduced in quality. The plate is now 180x180 but you could resize to bigger or smaller, just make sure you do not change the height (Z) so uncheck “uniform scale” when resizing.

If you want to slice the file manually for use without AMS or other printer please use these settings :

For the 0.4 Variant :

Print at 100% infill with a layer height of 0.04mm with a base layer of 0.2mm

Swap Instructions:
Start with Black
At layer #10 (0.56mm) swap to Red
At layer #21 (1mm) swap to Orange
At layer #34 (1.52mm) swap to White for the rest.

For the 0.8 Variant :

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.2mm

Swap Instructions:
Start with Black
At layer #6 (0.6mm) swap to Red
At layer #12 (1.08mm) swap to Orange
At layer #18 (1.56mm) swap to White for the rest.
 

I used Elegoo PLA , Black → Red → Orange → White

Be sure to check out my other models and/or give me a follow :)

Reminder : I share these works for free for hobbyists, you can even print them as gifts for friend and family.

If you like my work: a Boost on Makerworld is always appreciated!

Or if you want you could give me a tip or "buy me a coffee" on :  https://ko-fi.com/3deekes

If you are interested in selling any of my current and future releases send me a message to info@3deekes.be