Search models, users, collections, and posts
Chopper
IP Report
Print Profile(1)
0.08mm layer, 2 walls, 100% infill
Designer
4.2 h
1 plate
Open in Bambu Studio
Boost
20
51
4
1
31
17
Released
Description
Content has been automatically translated.
Print with 100% infill using a 0.08mm layer height and a 0.16mm base layer.
The model measures 96.22 x 171mm. You can print with higher layer heights, below the base thickness of 0.48mm.
The maximum allowable thickness is 2.24mm and the actual thickness is 2.24mm.
Filaments used:
#000000 Bambu Lab PLA Basic Black: Transmission distance: 0.6
#ff9016 Bambu Lab PLA Basic Pumpkin Orange: Transmission distance: 5.5
#fce300 Bambu Lab PLA Basic Yellow: Transmission distance: 6
#ffffff Bambu Lab PLA Basic Jade White: Transmission distance: 5
Change instructions:
Begin with black.
At layer 10 (0.88mm), change to pumpkin orange.
At layer 15 (1.28mm), change to yellow.
At layer 19 (1.6mm), change to Jade White for the remainder.
License
This user content is licensed under a
Creative Commons Attribution-Noncommercial
Comment & Rating (4)