Robin

Print with 100% infill using a 0.08 mm layer height and a 0.16 mm base layer.

The model measures 118.82 x 171 mm.

You can print with higher layer heights, below the base thickness of 0.48 mm.

The maximum allowed thickness is 2.24 mm and the actual thickness is 2.24 mm.

Filaments used:

#080a0d PLA PolyLite Black. Transmission distance: 0.3

#8d50bc PLA Copymaster 3D Perfect Purple. Transmission distance: 3.1

#ff9016 Bambu Lab PLA Basic Pumpkin Orange. Transmission distance: 5.5

#e2dedb PLA PolyLite White. Transmission distance: 5

Change instructions:

Start with black.

At layer 8 (0.72 mm), change to Perfect Purple.

At layer 13 (1.12 mm), change to Pumpkin Orange.

At layer #21 (1.76 mm) change it to white for the rest.