Samsung A53 phone case
Copyright Claim
Samsung A53 phone case
Boost
16
16
19
Print Profile(3)
0.16mm layer, 3 walls, 25% infill, no upper and lower layers
Designer
32 min
1 plate
TPU model, a bit smaller, for more grip
Designer
36 min
1 plate
for A1 mini
35 min
1 plate
Boost
16
16
19
0
88
70
Released
Description
This is a Phone case for Samsung A53. It's based on the infill pattern. For Slicing I removed the upper and lower layers so that the backplate looks like the infill pattern you choose.
-update 2.3.2024: Added better fitting for the phone, so that not just the corners hold it in place. Smoother edges added.
-update 10.3.2024: Added wider edges to hold the phone in place. Bigger hole for buttons
Comment & Rating (19)
All
Print Profile
TPU model, a bit smaller, for more grip
My first TPU print. Fits great. But my TPU is a bit to wobbly to use it as a safe phone case.
The designer has replied
1
Reply
Thanks for the feedback! The case is mainly made for hard materials. If you want a perfect print with TPU try out my phone case generator. You don't have to measure all out, you can just import import the measurements from the public excel sheet i put into the description. There you can also change the tolerances for TPU.
0
Reply
Print Profile
0.16mm layer, 3 walls, 25% infill, no upper and lower layers
super I printed it in TPU 95A HF
maybe a bit big, but scaling it up even by just 2% might fit even better, I'll try and update.
no problems when printing
(Edited)
The designer has replied
1
Reply
cool, thanks for your feedback
(Edited)0
Reply
really nice ^^ i printed 2 cases with Glow. one with Tri-Hexagon(35% infill) and the other with Gyroid(25% infill )
The designer has replied
1
Reply
cool! Thanks for your nice feedback☺️
0
Reply
Print Profile
0.16mm layer, 3 walls, 25% infill, no upper and lower layers
The designer has replied
1
Reply
cool :) thank you for your feedback! anything to improve?
0
Reply
no
0
Reply
Print Profile
0.16mm layer, 3 walls, 25% infill, no upper and lower layers
The designer has replied
1
Reply
Thank you for your Feedback and comment.☺️ I really appreciate that!
(Edited)2
Reply
Print Profile
0.16mm layer, 3 walls, 25% infill, no upper and lower layers
Strength Issue:nicht stabil genug für einen Schutz.
The designer has replied
0
Reply
Du kannst die Wandstärke und somit die Stabilität ganz einfach anpassen mit der Variable "wall thickness".
0
Reply
Replying to @RobinS
Das macht die Hülle auch nicht stabilgenug, ich habe 100% infill mit Nylon, die Hülle ist einfach zu dünn, und nicht stabil konstruiert.
0
Reply
Wenn du nicht zufrieden bist, dann bedien dich an dem Phonecase generator von mir. In der Excel Tabelle in der Beschreibung sind die Werte, dort kannst du dann auch die Dicke anpassen.
0
Reply
Print Profile
0.16mm layer, 3 walls, 25% infill, no upper and lower layers
super
0
Reply
Print Profile
0.16mm layer, 3 walls, 25% infill, no upper and lower layers
0
Reply
Print Profile
0.16mm layer, 3 walls, 25% infill, no upper and lower layers
0
Reply
Print Profile
for A1 mini
0
Reply
License
This user content is licensed under a
Creative Commons Attribution-Noncommercial-Share AlikeRelated Models
© 2024 MakerWorld