Icosahedron Lamp for LED Lamp Kit 001

Updated 20240520

Someone asked for the extra height of the lamp, so I added a part called"Icosahedron-Pole Extra height", you can choose to add 1, 2, or 3… of these parts, but be careful of the strength and the center of gravity. The print profile was added as well.

__________________________________________________________________________________________________________________________

Updated 20240407

After using the lamp for some time, I found the Pole parts started to incline, the bottom of the pole was too weak to hold the weight of the lamp, so I modified the shape of the pole's bottom&leg parts as the image shows, shorten the hanger part, now this issue should be fixed.

The parts" Icosahedron-Hanger", "Icosahedron-Pole Bottom", "Icosahedron-Pole Leg01", and "Icosahedron-Pole Leg02"  were replaced in this upgrade, and these parts in the print profiles were replaced as well.

__________________________________________________________________________________________________________________________

Disclaimer: This model is part of the Creator Program, When you purchase the hardware kit through the links below, creators may earn an affiliate commission as a reward of their work. (The creator program is currently in the trial phase. The application is not yet open to public.)

This is an Icosahedron lamp designed for Bambu Lab LED Lamp Kit 001 , I designed a pole hanger to hold it, so you can put it beside your computer or bedside as a night lamp.

It can be built in 3 types, you can also try to make a different lamp for yourself.

Hardware Kit: LED Lamp Kit 001

Recommended filaments: Bambu PLA Tough, Bambu PLA-CF, or other Bambu Filaments

The models can be separated in Bambu Studio, so you can make the shell and the back side in 2 colors. Because the white shell version is easy to leak the back color, so I made different parts for the white shell. You can download the parts name with "White shell", If you want to print a white shell lamp. All parts can be printed without supports, the pole parts need a raft to make them stable on the board.

这是一盏可使用拓竹LED模组的正二十面体吊灯，可自由组合拼接，正反面双色打印。白色款由于容易透出背部的颜色，专门做了与黑色款不同的模型，请选择文件名带有”White Shell"的模型打印。所有部件可无支撑打印，灯杆打印时底部需加至少两层衬垫（Raft)，建议模型与衬垫距离设为0，以保证稳固，打印后切除底部残余衬垫即可。安装说明见以下图片，其他详情见B站视频

Watch the video to get more information.

Assembly instructions:

Click "Like" if you like it, feel free to boost me or buy me a cup of coffee, thank you! Have fun!

If you want to sell the printed model, you need a Commercial license at: https://www.patreon.com/wuguigui/membership