Description
Here is yet another purge bucket for the Bambu Lab series printers. This one I designed to be printed in vase mode for super clean printing, no z-seam lines and uniform wall sheen/shine (using settings below). The 75mm depth requires one to sandwich the purge bucket between the printed and a wall to act as a backstop. The 150mm depth STL should be deep enough to use without a wall to act as a back stop and have extra volume for multi-color prints.
It is also parametric if you need a deeper or narrower version using Fusion 360 and opening the parameters dialog and changing the Depth user variable.
Print Settings (0.6mm nozzle recommended)
0.6mm Nozzle
- Spiral Vase Mode Enabled
- 0.25mm Layer Height
- Outer Wall Line Width = 1.499mm
- Inner Wall Line Width = 1.499mm
- 1 Wall Loop
- 0 Top Layers
- 6 Bottom Layers
- 50mm/s Outer Wall Speed
- 2500mm/s2 Outer Wall Acceleration
- Brim ONLY if required
0.4mm Nozzle
- 0.6mm nozzle recommended so it is more durable/stiffer but it can be printed but should be handled with care
- Spiral Vase Mode Enabled
- 0.20mm Layer Height
- Outer Wall Line Width = 0.999mm
- Inner Wall Line Width = 0.999mm
- 1 Wall Loop
- 0 Top Layers
- 5 Bottom Layers
- 50mm/s Outer Wall Speed
- 2500mm/s2 Outer Wall Acceleration
- Brim ONLY if required