Search models, users, collections, and posts
Cable roller
IP Report
Print Profile(1)
0.16mm layer, 2 walls, 15% infill
Designer
1.7 h
1 plate
Open in Bambu Studio
Boost
4
14
0
0
11
9
Released
Description
This is my first draft of a fairly straightforward 80mm cable roller that can turn most types of polymer clay or green stuff epoxy into a ribbed cable. Each rib is 0.5mm in width. The maximum width of the cable is rougly 4mm based on the guides on the side.
NOTE: The inner piece is pretty snugg. I recommend sanding both sides of it ever so slightly until you are happy with how it slides back and forth between the guides.
Since this is a work in progress I would love feeddback on how it performs. Let me know if you want wider or ever narrower ribs or if there are other ways of improving on the design.
License
This user content is licensed under a
Creative Commons Attribution-Noncommercial-Share Alike
Comment & Rating (0)