Shuriken Magnet — Ninja Weapons
Copyright Claim
Shuriken Magnet — Ninja Weapons
Boost
198
297
41
Print Profile(3)
![(Official) [All shapes on each plate] 0.2mm layer, 3 walls, 15% infill](https://makerworld.bblmw.com/makerworld/model/USe72f123e2a4329/design/2023-10-06_a032ac8de47bd.jpg?x-oss-process=image/resize,w_100/format,webp)
(Official) [All shapes on each plate] 0.2mm layer, 3 walls, 15% infill
Designer
2 h
4 plates
One of each with magnets, 0.2mm layer
1.4 h
1 plate
One of each without magnets (uncut), 0.2mm layer
1.3 h
1 plate
Open in Bambu Studio
Boost
198
297
41
2
365
220
Released
Description
Magnets in the shape of Shurikens, one of the Ninja weapons.
Caution
| Please be careful not to injure others or yourself, as the shapes of the models are very sharp. |
About Magnets
Use neodymium magnets.
Magnets need to be glued.
Size ─ DIA6mm × T3mm
Number Used ─
For the following models, put two magnets on top of each other.
- Shuriken-Magnet_Six-pointed_body.stl
- Shuriken-Magnet_Three-pointed_body.stl
For other models, insert one magnet per hole.
Comment & Rating (41)
All
Print Profile
(Official) [All shapes on each plate] 0.2mm layer, 3 walls, 15% infill
Awesome!!
0
Reply
Print Profile
(Official) [All shapes on each plate] 0.2mm layer, 3 walls, 15% infill
Good, magnet hole is a bit small.
0
Reply
Print Profile
One of each with magnets, 0.2mm layer
0
Reply
Really nice! I printed the four types, looking great on my fridge.
2
Reply
Print Profile
(Official) [All shapes on each plate] 0.2mm layer, 3 walls, 15% infill
Printed well but superior layer is a little ugly. Maybe ironing could have helped.
1
Reply
Print Profile
One of each with magnets, 0.2mm layer
nah
The designer has replied
0
Reply
What?
0
Reply
Print Profile
(Official) [All shapes on each plate] 0.2mm layer, 3 walls, 15% infill
too much weight for magnets to hold on steel surface
The designer has replied
0
Reply
Using neodymium magnets of the specified size should not be a problem.
0
Reply
Print Profile
One of each with magnets, 0.2mm layer
as described :)
1
Reply
Print Profile
(Official) [All shapes on each plate] 0.2mm layer, 3 walls, 15% infill
👍🏻👍🏻
0
Reply
Print Profile
One of each with magnets, 0.2mm layer
Modèle très chouette et très original. Impression réussie
0
Reply
License
This user content is licensed under a
Creative Commons Attribution-Noncommercial-Share AlikeRelated Models
© 2024 MakerWorld