Magnetic seal for glass door on 3d printer, Bambu P1S.
Uses 4 ¾" x 1/8" (19-20 mm x 3.0mm) rare earth magnets and 2 5/16 (8-10 mm) magnets.
I bought these from the local Hobby store. Measurements of the large magnets using Calipers are 2.7mm thick x 20mm diam :
Magnets hold the seal to the printer door frame, and also act as a magnetic hinge.
Print is slightly more than 32 grams and seems to stay in place pretty well.
Tapered dovetail construction allows seal to be longer than the print bed, and reasonably uncomplicated print and assembly
If you like, please ‘like’, follow and rate, or don't, no pressure. I thank you for your interest.
I have several other 3D printer addons, including an AMS buffer guide, a filament chute, and a magnetic door seal for the P1S.
You can check them out at Gomezgames2B upload page: https://makerworld.com/en/u/1906662470 ,…if you are so inclined.
To assemble the door seal:
This is kind of a new idea, if you have issues please leave me a comment and I will do my best to address them as soon as I can.
Thanks,