Jujutsu Kaisen Hueforge - Satoru Gojo

Project: Gojo Japan.hfp
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

The Model is 182.07x235mm in size
You may print at higher layer heights below the Base Thickness of 1.28mm
The Max allowed Thickness is 3.2mm and the Actual Thickness is 3.2mm

Filaments Used:
    PLA BambuLab Basic Black  Transmission Distance: 0.6
    PLA BambuLab Basic Jade White  Transmission Distance: 5
    PLA BambuLab Basic Red  Transmission Distance: 4
    PLA BambuLab Basic Yellow  Transmission Distance: 5.5
This print uses 4 unique filaments

Swap Instructions:
    Start with Black
    At layer #17 (1.44mm) swap to Jade White
    At layer #20 (1.68mm) swap to Black
    At layer #21 (1.76mm) swap to Red
    At layer #25 (2.08mm) swap to Black
    At layer #26 (2.16mm) swap to Jade White
    At layer #27 (2.24mm) swap to Red
    At layer #29 (2.4mm) swap to Jade White
    At layer #30 (2.48mm) swap to Yellow
    At layer #32 (2.64mm) swap to Jade White for the rest.